Namespaces
Variants
Views
Actions

Difference between revisions of "cpp/io/c/vfscanf"

From cppreference.com
< cpp‎ | io‎ | c
m (Text replace - "{{example cpp" to "{{example")
m (fmt)
 
(17 intermediate revisions by 8 users not shown)
Line 1: Line 1:
−
{{cpp/title | vscanf | vfscanf | vsscanf}}
+
{{cpp/title|vscanf|vfscanf|vsscanf}}
−
{{cpp/io/c/sidebar}}
+
{{cpp/io/c/navbar}}
−
{{ddcl list begin}}
+
{{dcl begin}}
−
{{ddcl list header | cstdio}}
+
{{dcl header|cstdio}}
−
{{ddcl list item | num=1 | notes={{mark since c++11}} |
+
{{dcl|num=1|since=c++11|
−
​int vscanf( const char *format, va_list vlist );​
+
int vscanf( const char* format, std::va_list vlist );
 
}}
 
}}
−
{{ddcl list item | num=2 | notes={{mark since c++11}} |
+
{{dcl|num=2|since=c++11|
−
int vfscanf( FILE *stream, const char *format, va_list vlist );
+
int vfscanf( std::FILE* stream, const char* format, std::va_list vlist );
 
}}
 
}}
−
{{ddcl list item | num=3 | notes={{mark since c++11}} |
+
{{dcl|num=3|since=c++11|
−
int vsscanf( const char *buffer, const char *format, va_list vlist );
+
int vsscanf( const char* buffer, const char* format, std::va_list vlist );
 
}}
 
}}
−
{{ddcl list end}}
+
{{dcl end}}
  
−
Reads data from the a variety of sources, interprets it according to {{tt|format}} and stores the results into locations defined by {{tt|vlist}}.
+
Reads data from a variety of sources, interprets it according to {{c|format}} and stores the results into locations defined by {{c|vlist}}.
  
−
1) reads the data from {{cpp|stdin}}
+
@1@ Reads the data from {{lc|stdin}}.
 +
@2@ Reads the data from file stream {{c|stream}}.
 +
@3@ Reads the data from null-terminated character string {{c|buffer}}.
  
−
2) reads the data from file stream {{tt|stream}}
+
===Parameters===
 +
{{par begin}}
 +
{{par|stream|input file stream to read from}}
 +
{{par|buffer|pointer to a null-terminated character string to read from}}
 +
{{par|format|pointer to a null-terminated character string specifying how to read the input}}
 +
{{par|vlist|variable argument list containing the receiving arguments.}}
 +
{{par end}}
  
−
3) reads the data from null-terminated character string {{tt|buffer}}
 
  
−
===Parameters===
 
−
{{param list begin}}
 
−
{{param list item | stream | input file stream to read from}}
 
−
{{param list item | buffer | pointer to a null-terminated character string to read from}}
 
−
{{param list item | format | pointer to a null-terminated character string specifying how to read the input.
 
 
{{cpp/io/c/scanf format}}
 
{{cpp/io/c/scanf format}}
−
}}
 
−
{{param list item | vlist | variable argument list containing the receiving arguments}}
 
−
{{param list end}}
 
  
 
===Return value===
 
===Return value===
 +
Number of arguments successfully read, or {{lc|EOF}} if failure occurs.
  
−
number of arguments successfully read, or {{cpp|EOF}} if failure occurs.
+
===Notes===
 +
All these functions invoke {{lc|va_arg}} at least once, the value of {{tt|arg}} is indeterminate after the return. These functions to not invoke {{lc|va_end}}, and it must be done by the caller.
  
 
===Example===
 
===Example===
 
{{example
 
{{example
−
| code=
+
|code=
−
| output=
+
#include <cstdarg>
 +
#include <cstdio>
 +
#include <iostream>
 +
#include <stdexcept>
 +
 
 +
void checked_sscanf(int count, const char* buf, const char *fmt, ...)
 +
{
 +
    std::va_list ap;
 +
    va_start(ap, fmt);
 +
    if (std::vsscanf(buf, fmt, ap) != count)
 +
        throw std::runtime_error("parsing error");
 +
    va_end(ap);
 +
}
 +
 
 +
int main()
 +
{
 +
    try
 +
    {
 +
        int n, m;
 +
        std::cout << "Parsing '1 2'... ";
 +
        checked_sscanf(2, "1 2", "%d %d", &n, &m);
 +
        std::cout << "success\n";
 +
        std::cout << "Parsing '1 a'... ";
 +
        checked_sscanf(2, "1 a", "%d %d", &n, &m);
 +
        std::cout << "success\n";
 +
    }
 +
    catch (const std::exception& e)
 +
    {
 +
        std::cout << e.what() << '\n';
 +
    }
 +
}
 +
|output=
 +
Parsing '1 2'... success
 +
Parsing '1 a'... parsing error
 
}}
 
}}
  
 
===See also===
 
===See also===
−
{{dcl list begin}}
+
{{dsc begin}}
−
{{dcl list template | cpp/io/c/dcl list fscanf}}
+
{{dsc inc|cpp/io/c/dsc fscanf}}
−
{{dcl list template | cpp/io/c/dcl list vfprintf}}
+
{{dsc inc|cpp/io/c/dsc vfprintf}}
−
{{dcl list end}}
+
{{dsc see c|c/io/vfscanf|vscanf|vfscanf|vsscanf}}
 +
{{dsc end}}
 +
 
 +
{{langlinks|de|es|fr|it|ja|pt|ru|zh}}

Latest revision as of 03:43, 1 September 2023

 
C++
 
Input/output library
 
C-style I/O
Types and objects
Functions
File access
Direct input/output
Unformatted input/output
Formatted input
vscanfvfscanfvsscanf
(C++11)(C++11)(C++11)    
(C++11)(C++11)(C++11)    
 
Defined in header <cstdio>
int vscanf( const char* format, std::va_list vlist );
 (1) (since C++11)
int vfscanf( std::FILE* stream, const char* format, std::va_list vlist );
 (2) (since C++11)
int vsscanf( const char* buffer, const char* format, std::va_list vlist );
 (3) (since C++11)

Reads data from a variety of sources, interprets it according to format and stores the results into locations defined by vlist.

1) Reads the data from stdin.
2) Reads the data from file stream stream.
3) Reads the data from null-terminated character string buffer.

Contents

[edit] Parameters

stream - input file stream to read from
buffer - pointer to a null-terminated character string to read from
format - pointer to a null-terminated character string specifying how to read the input
vlist - variable argument list containing the receiving arguments.


The format string consists of

  • non-whitespace multibyte characters except %: each such character in the format string consumes exactly one identical character from the input stream, or causes the function to fail if the next character on the stream does not compare equal.
  • whitespace characters: any single whitespace character in the format string consumes all available consecutive whitespace characters from the input (determined as if by calling isspace in a loop). Note that there is no difference between "\n", " ", "\t\t", or other whitespace in the format string.
  • conversion specifications. Each conversion specification has the following format:
  • introductory % character.
  • (optional) assignment-suppressing character *. If this option is present, the function does not assign the result of the conversion to any receiving argument.
  • (optional) integer number (greater than zero) that specifies maximum field width, that is, the maximum number of characters that the function is allowed to consume when doing the conversion specified by the current conversion specification. Note that %s and %[ may lead to buffer overflow if the width is not provided.
  • (optional) length modifier that specifies the size of the receiving argument, that is, the actual destination type. This affects the conversion accuracy and overflow rules. The default destination type is different for each conversion type (see table below).
  • conversion format specifier.

The following format specifiers are available:

Conversion
specifier 		Explanation Argument type
Length modifier →
 hh

(C++11)

h (none) l ll

(C++11)

j

(C++11)

z

(C++11)

t

(C++11)

L
% Matches literal %. N/A N/A N/A N/A N/A N/A N/A N/A N/A
c
Matches a character or a sequence of characters.

If a width specifier is used, matches exactly width characters (the argument must be a pointer to an array with sufficient room). Unlike %s and %[, does not append the null character to the array.

N/A N/A
char*
wchar_t*
 N/A N/A N/A N/A N/A
s
Matches a sequence of non-whitespace characters (a string).

If width specifier is used, matches up to width or until the first whitespace character, whichever appears first. Always stores a null character in addition to the characters matched (so the argument array must have room for at least width+1 characters)

[set]
Matches a non-empty sequence of character from set of characters.

If the first character of the set is ^, then all characters not in the set are matched. If the set begins with ] or ^] then the ] character is also included into the set. It is implementation-defined whether the character - in the non-initial position in the scanset may be indicating a range, as in [0-9]. If width specifier is used, matches only up to width. Always stores a null character in addition to the characters matched (so the argument array must have room for at least width+1 characters)

d
Matches a decimal integer.

The format of the number is the same as expected by strtol with the value 10 for the base argument

signed char* or unsigned char*
signed short* or unsigned short*
signed int* or unsigned int*
signed long* or unsigned long*
signed long long* or unsigned long long*
intmax_t* or uintmax_t*
size_t*
ptrdiff_t*
 N/A
i
Matches an integer.

The format of the number is the same as expected by strtol with the value ​0​ for the base argument (base is determined by the first characters parsed)

u
Matches an unsigned decimal integer.

The format of the number is the same as expected by strtoul with the value 10 for the base argument.

o
Matches an unsigned octal integer.

The format of the number is the same as expected by strtoul with the value 8 for the base argument

x, X
Matches an unsigned hexadecimal integer.

The format of the number is the same as expected by strtoul with the value 16 for the base argument

n
Returns the number of characters read so far.

No input is consumed. Does not increment the assignment count. If the specifier has assignment-suppressing operator defined, the behavior is undefined

a, A(C++11)
e, E
f, F
g, G
Matches a floating-point number.

The format of the number is the same as expected by strtof

N/A N/A
float*
double*
 N/A N/A N/A N/A
long double*
p
Matches implementation defined character sequence defining a pointer.

printf family of functions should produce the same sequence using %p format specifier

N/A N/A
void**
 N/A N/A N/A N/A N/A N/A

For every conversion specifier other than n, the longest sequence of input characters which does not exceed any specified field width and which either is exactly what the conversion specifier expects or is a prefix of a sequence it would expect, is what's consumed from the stream. The first character, if any, after this consumed sequence remains unread. If the consumed sequence has length zero or if the consumed sequence cannot be converted as specified above, the matching failure occurs unless end-of-file, an encoding error, or a read error prevented input from the stream, in which case it is an input failure.

All conversion specifiers other than [, c, and n consume and discard all leading whitespace characters (determined as if by calling isspace) before attempting to parse the input. These consumed characters do not count towards the specified maximum field width.

The conversion specifiers lc, ls, and l[ perform multibyte-to-wide character conversion as if by calling mbrtowc with an mbstate_t object initialized to zero before the first character is converted.

The conversion specifiers s and [ always store the null terminator in addition to the matched characters. The size of the destination array must be at least one greater than the specified field width. The use of %s or %[, without specifying the destination array size, is as unsafe as std::gets.

The correct conversion specifications for the fixed-width integer types (int8_t, etc) are defined in the header <cinttypes> (although SCNdMAX, SCNuMAX, etc is synonymous with %jd, %ju, etc).

There is a sequence point after the action of each conversion specifier; this permits storing multiple fields in the same "sink" variable.

When parsing an incomplete floating-point value that ends in the exponent with no digits, such as parsing "100er" with the conversion specifier %f, the sequence "100e" (the longest prefix of a possibly valid floating-point number) is consumed, resulting in a matching error (the consumed sequence cannot be converted to a floating-point number), with "r" remaining. Some existing implementations do not follow this rule and roll back to consume only "100", leaving "er", e.g. glibc bug 1765.

[edit] Return value

Number of arguments successfully read, or EOF if failure occurs.

[edit] Notes

All these functions invoke va_arg at least once, the value of arg is indeterminate after the return. These functions to not invoke va_end, and it must be done by the caller.

[edit] Example

Run this code
#include <cstdarg>
#include <cstdio>
#include <iostream>
#include <stdexcept>
 
void checked_sscanf(int count, const char* buf, const char *fmt, ...)
{
    std::va_list ap;
    va_start(ap, fmt);
    if (std::vsscanf(buf, fmt, ap) != count)
        throw std::runtime_error("parsing error");
    va_end(ap);
}
 
int main()
{
    try
    {
        int n, m;
        std::cout << "Parsing '1 2'... ";
        checked_sscanf(2, "1 2", "%d %d", &n, &m);
        std::cout << "success\n";
        std::cout << "Parsing '1 a'... ";
        checked_sscanf(2, "1 a", "%d %d", &n, &m);
        std::cout << "success\n";
    }
    catch (const std::exception& e)
    {
        std::cout << e.what() << '\n';
    }
}

Output: 

Parsing '1 2'... success
Parsing '1 a'... parsing error

[edit] See also

 reads formatted input from stdin, a file stream or a buffer
(function) [edit]
(C++11)
 prints formatted output to stdout, a file stream or a buffer
using variable argument list
(function) [edit]
C documentation for vscanf, vfscanf, vsscanf
Retrieved from "https://en.cppreference.com/mwiki/index.php?title=cpp/io/c/vfscanf&oldid=157667"