Difference between revisions of "cpp/language/constraints"

Latest revision as of 00:12, 14 August 2024

Class templates, function templates, and non-template functions (typically members of class templates) might be associated with a constraint, which specifies the requirements on template arguments, which can be used to select the most appropriate function overloads and template specializations.

Named sets of such requirements are called concepts. Each concept is a predicate, evaluated at compile time, and becomes a part of the interface of a template where it is used as a constraint:

#include <cstddef>
#include <concepts>
#include <functional>
#include <string>
 
// Declaration of the concept “Hashable”, which is satisfied by any type “T”
// such that for values “a” of type “T”, the expression std::hash<T>{}(a)
// compiles and its result is convertible to std::size_t
template<typename T>
concept Hashable = requires(T a)
{
    { std::hash<T>{}(a) } -> std::convertible_to<std::size_t>;
};
 
struct meow {};
 
// Constrained C++20 function template:
template<Hashable T>
void f(T) {}
//
// Alternative ways to apply the same constraint:
// template<typename T>
//     requires Hashable<T>
// void f(T) {}
//
// template<typename T>
// void f(T) requires Hashable<T> {}
//
// void f(Hashable auto /* parameter-name */) {}
 
int main()
{
    using std::operator""s;
 
    f("abc"s);    // OK, std::string satisfies Hashable
    // f(meow{}); // Error: meow does not satisfy Hashable
}

Violations of constraints are detected at compile time, early in the template instantiation process, which leads to easy to follow error messages:

std::list<int> l = {3, -1, 10};
std::sort(l.begin(), l.end()); 
// Typical compiler diagnostic without concepts:
// invalid operands to binary expression ('std::_List_iterator<int>' and
// 'std::_List_iterator<int>')
//                           std::__lg(__last - __first) * 2);
//                                     ~~~~~~ ^ ~~~~~~~
// ... 50 lines of output ...
//
// Typical compiler diagnostic with concepts:
// error: cannot call std::sort with std::_List_iterator<int>
// note:  concept RandomAccessIterator<std::_List_iterator<int>> was not satisfied

The intent of concepts is to model semantic categories (Number, Range, RegularFunction) rather than syntactic restrictions (HasPlus, Array). According to ISO C++ core guideline T.20, "The ability to specify meaningful semantics is a defining characteristic of a true concept, as opposed to a syntactic constraint."

[edit] Concepts

A concept is a named set of requirements. The definition of a concept must appear at namespace scope.

The definition of a concept has the form

// concept
template<class T, class U>
concept Derived = std::is_base_of<U, T>::value;

Concepts cannot recursively refer to themselves and cannot be constrained:

template<typename T>
concept V = V<T*>; // error: recursive concept
 
template<class T>
concept C1 = true;
template<C1 T>
concept Error1 = true; // Error: C1 T attempts to constrain a concept definition
template<class T> requires C1<T>
concept Error2 = true; // Error: the requires clause attempts to constrain a concept

Explicit instantiations, explicit specializations, or partial specializations of concepts are not allowed (the meaning of the original definition of a constraint cannot be changed).

Concepts can be named in an id-expression. The value of the id-expression is true if the constraint expression is satisfied, and false otherwise.

Concepts can also be named in a type-constraint, as part of

• type template parameter declaration,
• placeholder type specifier,
• compound requirement.

In a type-constraint, a concept takes one less template argument than its parameter list demands, because the contextually deduced type is implicitly used as the first argument of the concept.

template<class T, class U>
concept Derived = std::is_base_of<U, T>::value;
 
template<Derived<Base> T>
void f(T); // T is constrained by Derived<T, Base>

[edit] Constraints

A constraint is a sequence of logical operations and operands that specifies requirements on template arguments. They can appear within requires expressions or directly as bodies of concepts.

There are three(until C++26)four(since C++26) types of constraints:

The constraint associated with a declaration is determined by normalizing a logical AND expression whose operands are in the following order:

1. the constraint expression introduced for each constrained type template parameter or non-type template parameter declared with a constrained placeholder type, in order of appearance;
2. the constraint expression in the requires clause after the template parameter list;
3. the constraint expression introduced for each parameter with constrained placeholder type in an abbreviated function template declaration;
4. the constraint expression in the trailing requires clause.

This order determines the order in which constraints are instantiated when checking for satisfaction.

[edit] Redeclarations

A constrained declaration may only be redeclared using the same syntactic form. No diagnostic is required:

// These first two declarations of f are fine
template<Incrementable T>
void f(T) requires Decrementable<T>;
 
template<Incrementable T>
void f(T) requires Decrementable<T>; // OK, redeclaration
 
// Inclusion of this third, logically-equivalent-but-syntactically-different
// declaration of f is ill-formed, no diagnostic required
template<typename T>
    requires Incrementable<T> && Decrementable<T>
void f(T);
 
// The following two declarations have different constraints:
// the first declaration has Incrementable<T> && Decrementable<T>
// the second declaration has Decrementable<T> && Incrementable<T>
// Even though they are logically equivalent.
 
template<Incrementable T> 
void g(T) requires Decrementable<T>;
 
template<Decrementable T> 
void g(T) requires Incrementable<T>; // ill-formed, no diagnostic required

[edit] Conjunctions

The conjunction of two constraints is formed by using the && operator in the constraint expression:

template<class T>
concept Integral = std::is_integral<T>::value;
template<class T>
concept SignedIntegral = Integral<T> && std::is_signed<T>::value;
template<class T>
concept UnsignedIntegral = Integral<T> && !SignedIntegral<T>;

A conjunction of two constraints is satisfied only if both constraints are satisfied. Conjunctions are evaluated left to right and short-circuited (if the left constraint is not satisfied, template argument substitution into the right constraint is not attempted: this prevents failures due to substitution outside of immediate context).

template<typename T>
constexpr bool get_value() { return T::value; }
 
template<typename T>
    requires (sizeof(T) > 1 && get_value<T>())
void f(T);   // #1
 
void f(int); // #2
 
void g()
{
    f('A'); // OK, calls #2. When checking the constraints of #1,
            // 'sizeof(char) > 1' is not satisfied, so get_value<T>() is not checked
}

[edit] Disjunctions

The disjunction of two constraints is formed by using the || operator in the constraint expression.

A disjunction of two constraints is satisfied if either constraint is satisfied. Disjunctions are evaluated left to right and short-circuited (if the left constraint is satisfied, template argument substitution into the right constraint is not attempted).

template<class T = void>
    requires EqualityComparable<T> || Same<T, void>
struct equal_to;

[edit] Atomic constraints

An atomic constraint consists of an expression E and a mapping from the template parameters that appear within E to template arguments involving the template parameters of the constrained entity, called its parameter mapping.

Atomic constraints are formed during constraint normalization. E is never a logical AND or logical OR expression (those form conjunctions and disjunctions, respectively).

Satisfaction of an atomic constraint is checked by substituting the parameter mapping and template arguments into the expression E. If the substitution results in an invalid type or expression, the constraint is not satisfied. Otherwise, E, after any lvalue-to-rvalue conversion, must be a prvalue constant expression of type bool, and the constraint is satisfied if and only if it evaluates to true.

The type of E after substitution must be exactly bool. No conversion is permitted:

template<typename T>
struct S
{
    constexpr operator bool() const { return true; }
};
 
template<typename T>
    requires (S<T>{})
void f(T);   // #1
 
void f(int); // #2
 
void g()
{
    f(0); // error: S<int>{} does not have type bool when checking #1,
          // even though #2 is a better match
}

Two atomic constraints are considered identical if they are formed from the same expression at the source level and their parameter mappings are equivalent.

template<class T>
constexpr bool is_meowable = true;
 
template<class T>
constexpr bool is_cat = true;
 
template<class T>
concept Meowable = is_meowable<T>;
 
template<class T>
concept BadMeowableCat = is_meowable<T> && is_cat<T>;
 
template<class T>
concept GoodMeowableCat = Meowable<T> && is_cat<T>;
 
template<Meowable T>
void f1(T); // #1
 
template<BadMeowableCat T>
void f1(T); // #2
 
template<Meowable T>
void f2(T); // #3
 
template<GoodMeowableCat T>
void f2(T); // #4
 
void g()
{
    f1(0); // error, ambiguous:
           // the is_meowable<T> in Meowable and BadMeowableCat forms distinct atomic
           // constraints that are not identical (and so do not subsume each other)
 
    f2(0); // OK, calls #4, more constrained than #3
           // GoodMeowableCat got its is_meowable<T> from Meowable
}

[edit] Constraint normalization

Constraint normalization is the process that transforms a constraint expression into a sequence of conjunctions and disjunctions of atomic constraints. The normal form of an expression is defined as follows:

• The normal form of an expression (E) is the normal form of E.
• The normal form of an expression E1 && E2 is the conjunction of the normal forms of E1 and E2.
• The normal form of an expression E1 || E2 is the disjunction of the normal forms of E1 and E2.
• The normal form of an expression C<A1, A2, ... , AN>, where C names a concept, is the normal form of the constraint expression of C, after substituting A1, A2, ... , AN for C's respective template parameters in the parameter mappings of each atomic constraint of C. If any such substitution into the parameter mappings results in an invalid type or expression, the program is ill-formed, no diagnostic required.

template<typename T>
concept A = T::value || true;
 
template<typename U>
concept B = A<U*>; // OK: normalized to the disjunction of 
                   // - T::value (with mapping T -> U*) and
                   // - true (with an empty mapping).
                   // No invalid type in mapping even though
                   // T::value is ill-formed for all pointer types
 
template<typename V>
concept C = B<V&>; // Normalizes to the disjunction of
                   // - T::value (with mapping T-> V&*) and
                   // - true (with an empty mapping).
                   // Invalid type V&* formed in mapping => ill-formed NDR

• The normal form of any other expression E is the atomic constraint whose expression is E and whose parameter mapping is the identity mapping. This includes all fold expressions, even those folding over the && or || operators.

User-defined overloads of && or || have no effect on constraint normalization.

[edit] requires clauses

The keyword requires is used to introduce a requires clause, which specifies constraints on template arguments or on a function declaration.

template<typename T>
void f(T&&) requires Eq<T>; // can appear as the last element of a function declarator
 
template<typename T> requires Addable<T> // or right after a template parameter list
T add(T a, T b) { return a + b; }

In this case, the keyword requires must be followed by some constant expression (so it's possible to write requires true), but the intent is that a named concept (as in the example above) or a conjunction/disjunction of named concepts or a requires expression is used.

The expression must have one of the following forms:

• A primary expression, e.g. Swappable<T>, std::is_integral<T>::value, (std::is_object_v<Args> && ...), or any parenthesized expression.
• A sequence of primary expressions joined with the operator &&.
• A sequence of aforementioned expressions joined with the operator ||.

template<class T>
constexpr bool is_meowable = true;
 
template<class T>
constexpr bool is_purrable() { return true; }
 
template<class T>
void f(T) requires is_meowable<T>; // OK
 
template<class T>
void g(T) requires is_purrable<T>(); // error, is_purrable<T>() is not a primary expression
 
template<class T>
void h(T) requires (is_purrable<T>()); // OK

[edit] Partial ordering of constraints

Before any further analysis, constraints are normalized by substituting the body of every named concept and every requires expression until what is left is a sequence of conjunctions and disjunctions on atomic constraints.

A constraint P is said to subsume constraint Q if it can be proven that P implies Q up to the identity of atomic constraints in P and Q. (Types and expressions are not analyzed for equivalence: N > 0 does not subsume N >= 0).

Specifically, first P is converted to disjunctive normal form and Q is converted to conjunctive normal form. P subsumes Q if and only if:

• every disjunctive clause in the disjunctive normal form of P subsumes every conjunctive clause in the conjunctive normal form of Q, where
• a disjunctive clause subsumes a conjunctive clause if and only if there is an atomic constraint U in the disjunctive clause and an atomic constraint V in the conjunctive clause such that U subsumes V;
• an atomic constraint A subsumes an atomic constraint B if and only if they are identical using the rules described above.

Subsumption relationship defines partial order of constraints, which is used to determine:

• the best viable candidate for a non-template function in overload resolution
• the address of a non-template function in an overload set
• the best match for a template template argument
• partial ordering of class template specializations
• partial ordering of function templates

If declarations D1 and D2 are constrained and D1's associated constraints subsume D2's associated constraints (or if D2 is unconstrained), then D1 is said to be at least as constrained as D2. If D1 is at least as constrained as D2, and D2 is not at least as constrained as D1, then D1 is more constrained than D2.

template<typename T>
concept Decrementable = requires(T t) { --t; };
template<typename T>
concept RevIterator = Decrementable<T> && requires(T t) { *t; };
 
// RevIterator subsumes Decrementable, but not the other way around
 
template<Decrementable T>
void f(T); // #1
 
template<RevIterator T>
void f(T); // #2, more constrained than #1
 
f(0);       // int only satisfies Decrementable, selects #1
f((int*)0); // int* satisfies both constraints, selects #2 as more constrained
 
template<class T>
void g(T); // #3 (unconstrained)
 
template<Decrementable T>
void g(T); // #4
 
g(true); // bool does not satisfy Decrementable, selects #3
g(0);    // int satisfies Decrementable, selects #4 because it is more constrained
 
template<typename T>
concept RevIterator2 = requires(T t) { --t; *t; };
 
template<Decrementable T>
void h(T); // #5
 
template<RevIterator2 T>
void h(T); // #6
 
h((int*)0); // ambiguous

[edit] Notes

[edit] Keywords

concept, requires, typename

[edit] Defect reports

The following behavior-changing defect reports were applied retroactively to previously published C++ standards.

[edit] See also

• Concepts TS
• Named requirements